- June 27, 2016
INDUSTRIAL CUBIC EVAPORATORS (IRP- ICP- IFP)Evaporators
HIGH-PERFORMANCE, FOR INDUSTRIAL COOLING AND FREEZING CHAMBERS.
This range of Industrial Coolers features 124 models and has been designed for both high and medium-temperature industrial cooling applications, with cooling capacities from 12,000 to 168,500 W (IRP series) and for low-temperature industrial freezing applications with cooling capacities from 9.500 to 139,000 W (ICP series).
Built using copper tubes with a 1/2” diameter according to CUPROCLIMA® specifications, with aluminum corrugated fins. High performance rates can be achieved with these coils.
Fin spacing is 4 mm in the IRP series, 7 mm in the ICP series and 10 mm in the IFP series.
Every coil has passed a leakage test under a rated pressure of 3,923 kPa (40 kg/cm2) and pressurized using nitrogen at 147 kPa (1.5 kg/cm2) in order to avoid the corrosion of the inner surface of the copper tubes.
The metal casing of the unit is manufactured in galvanized steel. Its external surface has an epoxy-polyester finish and is then baked and cured at 180°C, providing a high resistance to corrosion, even under extreme environmental conditions. Unfinished casing with a 450 mm diameter (Mg – Al).
The drip trays and side panels are easy to disassemble from the casework, providing easy and quick access to the inside of the unit.
Fans and motors:
Fans have a 450mm, 630mm or 800mm diameter (depending on the model) and feature three-phase motors (230 V / 400V @ 50-60 Hz).
They are shielded with a stainless steel tube and their terminals are vulcanized over it to avoid electric shunts; every heater includes a single ground wire.
They are strategically located across the finned coil in order to achieve suitable and uniform defrosting.
Electric heaters are included in the CC series and are optional in the CR series.
- Copper Fins
- Coated Fins
- Aluminum (only for 450 mm diameter)
- Stainless Steel
- Hot gas defrosting
- Hot gas defrosting in coil and electric defrosting in tray
- Electric defrosting (only for IRP)
- Water defrosting
- Fan ring heaters
- Blygold Treatment
- High-Efficiency Fans
- R134a, R404A, R407F, R448A, R449A, R507
- Glycol Water